Back to Top

Control Valves

Safety relief valve

Product ID: INS-07-01-08

Pressure relief valves are force balanced valves and when the inlet pressure increases; it overcomes a spring load causing the imbalance at the disk. The valve then relieves the fluid and reduces the pressure in the system.

Flush Bottom Control valve

Product ID: INS-07-01-06

  • For tank and vessel draining.
  • Suitable for mounting on vessel manhole pad flange.
  • Discharge connection at 45°/60°/90°
  • Size :
1.0” x 0.75” 1.5” x 1.0” 2.0” x 1.5”
3.0” x 2.0” 4.0” x 3.0”  6.0” x 4.0”
8.0” x 6.0” 10.0” x 8.0“ 12.0” x 10.


Product ID: INS-07-01-04

This is the most basic type of Desuperheater, consisting of a fixed area nozzle arranged to face downstream at or near the Desuperheating pipe. The Mechanical Spray Desuperheater relies on the pressure differential available across the nozzle to achieve the conditions for rapid absorption of the water into the steam.

Butterfly Control Valve

Product ID: INS-07-01-02

These Control Valves have less resistance to flow path and are most suitable for handling higher flow rates. These valves are most economical compared to other valve types and can be used for both tight shut off and moderate control duty applications.
Sizes from 2” To 72”

Positioners and Actuators

Product ID: INS-07-01-07

  • Valve Positioner
  • Position Transmiter / Limit Switch
  • Linear Actuator
  • Rotary Actuator Electrical
  • Actuator Sinigle phase
  • Electrical Actuator - Three phase

Vee-Notch Ball Valve

Product ID: INS-07-01-05

  • High Performance V-Ball Control Valve
  • Size : from 0.5"to 18.0"
  • Pressure Class : Up to ANSI CL 900
  • Body Type : One - Piece V-notch Ball, Straight - Through, Wafer

Knife edge gate valve

Product ID: INS-07-01-03

'0' Ported Knife Edge Gate Valves are best when handling Pulp containing PINS, FOREIGN Particles. Fluids like SOLID PHOSPHORIC ACIDS ROCK SLURRY and similar Fluids containing HARD Particles can be easily handled.
Sizes: 100 NB to 800 NB
Rating: ANSI 150#

Globe Control Valve

Product ID: INS-07-01-01

Body Type : 2way, 3way,Angle & Jacketed
Size : from 1.2" to 30.0"
Design Features    

  • Rugged heavy duty industrial control valve
  • Proven and accepted design
  • High thrust cylinder actuator
  • Exceptionally tight shutoff
  • Ease of maintenance
  • High degree of spare part interchangeability
  • Lowest total life cycle cost